Sporlan Gas cooler/ Flash gas bypass valves for CO₂

• Permanent magnet bipolar
• Phase Current 275 mA (using current limited/chopper drive)
• MOPD GC: 90 bar (1305 psid), FGB: 50 bar (725 psid)
• Fluid Temperature Range -40°C to 115°C (-40°F to 239°F)
• Ambient Temperature Range -40°C to 60°C (-40°F to 140°F)
• Internal (wet) motorHigh resolution actuators with 2500 steps
• 7.25 second full-stroke actuation
• Rated for 140 barg (2030 psig) maximum working pressure
• Possess a 7.25 second full stroke actuation 
• Open design: Can be driven through a 0-10V or 4-20 mA interface
• Driven by Parker Sporlan PSD4 Interface Board and PSS4B Backup Power Module

• GC -10, -20, -30, -40 and -50 applicable as gas cooler/holdback valves but can also be applied as flash gas bypass valves
• The FGB -60 and -70 are specifically designed to extend the range of the GC family when applied as flash gas bypass valves

• The valve family can be broken into two distinct pieces: the bodies and the cartridge assemblies
• Valve bodies are available with three connection sizes: ½ inch (12.7mm), ¾
• inch (19.05 mm) and 1 inch (25.4 mm)
• The three bodies are compatible with all cartridge assemblies

• Unlike the GC family, the port is not integrated into the stepper motor actuator assembly, but mounted directly into the valve body
• Single body valve available 1 inch (25.4mm)
• Valve is installed in the low pressure side of the system allowing it to utilise a 1-1/8 inch (28.58 mm) ODF or 1-3/8 inch (34.93 mm) ODM braze joint

Advantages

• Customised pin and port combinations to provide excellent full range flow control
• Interchangeable bodies with flexible connections
• Tight seating capability
• Feature synthetic seat discs to ensure tight shutoff 

Application

• Designed specifically for CO₂ transcritical systems