Discharge line mufflers SCY-P6 / 64 bar (928 psig)

CO₂subcritical / 64 bar

Reduction of noise caused by gas pulses in the discharge lines of refrigerating and air conditioning installations, running with high working pressures

Design allows coverage of a wide range of frequencies

Technical specifications

Maximum working pressure: up to 64 bar with CO₂ in subcritical compression systems
Products are compatible with CO₂ and HFCs, as well as with its associated oils and additives. Products are designed for use of nonhazardous refrigerants from group 2 of PED 97/23/EC
Product classification in CE categories is performed using the PED 97/23/EC table, corresponding to a volume-based selection
Hermetically sealed outer steel enclosure with paint to ensure a high resistance to corrosion

Several types of connections are possible on standard products:

To be brazed for tubes in inches (S)
To be brazed for tubes in millimeters (MMS)

Advantages

Design allows coverage of a wide range of frequencies
Discharge line muffler mounting is possible in vertical and horizontal positions.
There is no oil trap whichever the position; the refrigerant can flow in both directions
Excellent distribution of the refrigerant in its gaseous phase, with minimum pressure drop
The copper-plated steel connections up to a diameter of 3/4’’ - 18 mm facilitate the brazing and allow using brazing alloys with a low silver percentage

Appllications

Reduction of noise caused by gas pulses in the discharge lines of refrigerating and air conditioning installations, running with high working pressures